HN

I have an appreciation for very bright lamps, and the project is neat, but that stuck out to me.

I'm always fascinated by people who both feel comfortable ignoring maybe the single most impactful society-determining apparatus but will also say "no one could have seen that coming", where that is whatever they were unaware of because they chose to check out. I find the stance so fascinating because for myself, it would be impossible to not try and understand why the world is the way it is.

Everything is downstream of politics whether people want to recognize that or not, and choosing to ignore it is, in fact, a political choice.

> Blink and you’ll get a different measurement.

This means your environment is not controlled enough. Also quality control is usually done in terms of statistics. You might want to read something called gauge R&R. That being said, you should be proud of being able to ship a physical product!

As for quality checks, software quality teams pales in comparison to hardware quality teams. Mainly as you said, there’s a lot checks you can do in software. For hardware, bigger companies have to have their vendors qualified. The vendors have to follow their customer guidelines and do outgoing inspection. Then the company has a division to do incoming inspection. There’s a traveler that follows the kit (of parts) and there’s usually subassembly quality checks. Then final full build checks before it leaves the door.

Years ago, there was an HN article "You Need More Lumens"[1], which in turn led me down a rabbit hole.

I ended up purchasing:

   4 standard table lamps from Target,
  28 2000-lumen Cree LEDs bulbs[2] and,
   4 7-way splitters[3].

[1] https://news.ycombinator.com/item?id=10957614

[2] https://www.amazon.com/dp/B08H4RJQTT

[3] https://www.amazon.com/dp/B01FKIE6M4

The other one noted if you don't specify the density of plastic for bags, or paper for bags and packing, you get clingfilm thinner than you thought existed, and paper which is almost tissue in its weakness. You don't even get boxes to put the boxes in, if you don't specify boxes to be delivered in boxes. So now wrapping a pallet becomes a nightmare if they don't stack. And if you don't specify how many to stack, and how to pad the stack, they won't do unit height stacking if it costs labour time. Your risk.

Some of this like the casting mistake, or the knob thing, could happen anywhere and you have to be close to final manufacture spec to find out e.g. the metal coating impinges on the knob at the free space you specified, because your test rig didn't have powder coating. Or, that a design feature you need like the light entry holes, is used by the casting engineer as pour points because it looked like you'd specified mould pour points not functional holes.

But other things like "yea, you didn't spec how long to make the tails so we cut the tails as close as we could" is just the cheapening above: if you don't SAY its a 10cm tail for the connector, it will be 2cm, if saving 8cm of cable saves money for them.

I've read some stuff which says the cost of 5 SBC boards with pre-applied SMD is now so low, you might as well order 5 so you get at least 1 which works. That means they will wind up working out your tolerance for failure, and produce goods to meet that: if 1 in 5 is viable, thats what they'll target.

One downside is that the active fan cooling design is questionable - the air goes over the top of the LEDs, and there aren't any dedicated exit holes so the air is just squeezing through the very small gap between the glass and the heatsink. There are also blotches of paint that worsen the TIM contact between the PCB and the heatsink. I used a rotary tool to remove those blotches.

What happened after this? the factory have to replace the casting mold at their own expense or you have to pay for it?

Hats off to the author for making it through! What a start to the journey!

[1] https://www.pcgamer.com/introducing-gameref-the-anti-cheat-h...

After 20 years of system engineering, I just expected this to always be the case. Until my most recent job with a bunch of startups, where people fly by the seat of their pants, there's no communication, documentation, protection or testing, for anything. I am pissed off daily that things don't go wrong, because people now think this is normal, and it goes against everything I've learned from experience. It seems I stumbled onto the corollary of Murphy's Law: when you expect everything to go wrong, nothing does.

I recently changed my car's headlamps to Chinese LED which claims to be about 37kLm and I don't know how much it is probably less than that.

Two of those lamps costee me around $24 on Amazon US (pretty sure under $10 in China).

What makes this $800+ ?

> That was the worst period of my life; I would go to bed literally shaking with stress. In my opinion, Not Cool!

The store is still online so I assume it must be. Let me run this by my wife haha.

How/where did you find your suppliers/factories?

What stood out to me: the factory miscommunications and quality issues compound because you can't iterate as fast as software. Each mistake costs weeks and thousands of dollars.

For anyone considering hardware: if you're not getting deposits or strong signals of purchase intent before tooling up, you're basically gambling. The author's approach of getting commitments first is the right playbook.

https://www.nature.com/articles/s44271-025-00373-9

How you get funding for a hardware startup without cursory research into this is staggering.